Vacuum Pump In-Line Air Purifiers

FEATURES

 • Prevents Pollution of Work Environments
 • Minimal H2O Pressure Drop
 • Completely Disposable
 •
Maintenance Free
 • Made with Adsorbent Activated Carbon
 •
Particle Filtration to 0.5 Microns


VP-100

APPLICATIONS
Disposable Vacuum Pump In-Line Air Purifiers, Models VP-100, VP-200, VP-300, VP-400, are specifically designed to remove harmful organic vapors, aerosols, fine particles, and other foreign matter from vacuum air and compressed air. Units prevent pollution of laboratory and industrial work environments. Models 250-JCB, 500-SKB, MF-4SKCB, Vacuum Pump In-line Air Purifiers are recommended for installation after mercury filled manometers, instruments and other calibration equipment. Unlike VP Series Purifiers, units are supplied with impregnated carbon for efficient adsorption of hazardous mercury vapor not readily removed by standard activated carbon.

Click here for a general list of contaminants removed by this air filter.


VP-200

MERCURY REMOVAL
Models 25-JCB, 500-SKCB, MF-2JKCB, MF-4SKCB are manufactured with a high grade impregnated carbon specifically used for mercury adsorption. Each gram of carbon can adsorb approximately 5% of its own weight in mercury vapor. For best results, install purifier on discharge side of vacuum pump. Monitor mercury levels routinely on purifier outlet to insure effectiveness, and replace when mercury levels exceed permissible exposure levels. When removing heavy concentrations of mercury over 1500 ug/m3, it is advisable to install purifiers in series as shown below for added protection.


VP-300

INSTALLATION AND REPLACEMENT
Units can be easily installed directly to vacuum pump, or system piping using standard NPT pipe fittings. Replace according to specified manufacturer's replacement, or when a noticeable odor is detected on purifier discharge. When used only to remove fine particles, replace every six months from date of installation.


VP-400

SPECIFICATIONS
Call for complete specifications.

Air Filter Model
Maximum Oil Adsorption Capacity (ozs)
Air Flow 100 psig @ 1 psid (SCFM)
VP-100
1.0
19.0
VP-200
1.5
10.7
VP-300
3.5
15.8
VP-400
3.5
14.6
250-JCB
N/A
18.0
500-SKCB
N/A
9.5
MF-2JKCB
N/A
14.8
MF-4SKCB
N/A
13.7

250-JCB


500-SKCB

MF-2JKCB

MF-4SKCB

 

 

 

 

 

 


Serving Industry for Over 50 Years


Phone: (508) 481-8348 • Fax: (508) 481-1136 • Email: saleskobyfilters@aol.com