
Mainline Air Purifier
FEATURES
Easily Installed after Compressor
Removes Bulk Liquid Oil & Water from Airstream
Supplied with Disposable Carbon Cartridge
Particle Filtration to 0.5 Microns
APPLICATIONS
The
PMC-2 Mainline is designed for permanent installation to compressed
air line. Bulk liquid impurities such as water and oil, settle to bottom
of casting, and are expelled through manual drain. Remaining impurities
such as oil aerosol, oil vapor, fine particles and other foreign matter
are removed by disposable activated carbon cartridge. The PCM-2 Mainline
is recommended for installation before Koby Air Purifiers for applications
such as air breathing, or when visual signs of condensed water and oil
are present at point of air use.
Click
here for a general list of contaminants removed by this filter.
INSTALLATION
AND REPLACEMENT
Install
on high Pressure side of regulator on compressed air line using standard
pipe fittings. Drain off bulk liquid contaminants periodically through
manual petcock. Replace disposable activated carbon cartridge every
60 days from date of installation, or immediately if accidentally saturated
with liquid water and oil.
AIR
BREATHING DATA
Laboratory
tested Koby Air Purifiers are extremely effective in removing harmful
contaminants from compressed air supplied to respirators, masks, and
hoods. The PMC-2 Mainline and Junior Model Air Purifier should be installed
in series as shown below for lubricated air systems. The Junior Purifier
should not be considered a substitute for the Mainline Air Purifier:
however, it provides additional protection against vapors, aerosols,
and particulates. Purifiers can be operated continuously in series for
60 days, and replaced thereafter, or when a noticeable odor is detected
in compressed airstream.
WARNING:
Koby Air Purifiers, as well as other activated carbon purifiers, will
not remove carbon monoxide, or carbon dioxide. It is the responsibility
of the end user to test, and control the proper levels of carbon dioxide,
and carbon monoxide, from the compressed air source. Proper location
of compressor away from processed emissions, and contaminated atmospheres
is essential.

SPECIFICATIONS
for PMC-2 Mainline
SPECIFICATIONS
for PMC-2 Cartridge